Village of Belcarra Zoning Bylaw
11 zone definitions. 3 with development rules (height, FAR, setbacks).
The Village of Belcarra, located in the Metro Vancouver region near Port Moody, operates under a single residential zone designation (R1) established through its zoning bylaw. The R1 Residential zone permits a maximum height of 10.0 metres with a floor area ratio of 0.5, requiring front setbacks of 6.0 metres, rear setbacks of 7.5 metres, and side setbacks of 1.5 metres. The zoning bylaw does not specify permissions or restrictions regarding secondary suites based on available zone data. Belcarra's zoning structure reflects a single-zone approach typical of smaller residential municipalities in the Lower Mainland.
Region: British Columbia
Zone Definitions
| Zone Code | Zone Name | Category | Max Height | FAR | Front Setback | Rear Setback | Side Setback | Suite | Bylaw |
|---|---|---|---|---|---|---|---|---|---|
| CI-1 | Civic Institutional | institutional | -- | -- | -- | -- | -- | -- | CI-1 Bylaw |
| P-1 | Regional Park | other | -- | -- | -- | -- | -- | -- | P-1 Bylaw |
| P-2 | Provincial Park | other | -- | -- | -- | -- | -- | -- | P-2 Bylaw |
| R-1 | Rural | rural | -- | -- | -- | -- | -- | -- | R-1 Bylaw |
| RM-1 | Duplex or One or Two-House Zone | residential | 9.6m | -- | 7.5m | 7.5m | 3.0m | -- | RM-1 Bylaw |
| RM-2 | Farrer Cove South Zone | residential | -- | -- | 7.5m | 7.5m | 3.0m | -- | RM-2 Bylaw |
| RM-3 | Duplex or Four-House Zone | residential | -- | -- | -- | -- | -- | -- | RM-3 Bylaw |
| RS-1 | One-Family Residential Zone | residential | 9.6m | -- | 7.5m | 7.5m | 3.0m | -- | RS-1 Bylaw |
| W-1 | Marine 1 | other | -- | -- | -- | -- | -- | -- | W-1 Bylaw |
| W-2 | Marine 2 | other | -- | -- | -- | -- | -- | -- | W-2 Bylaw |
| W-3 | Marine 3 | other | -- | -- | -- | -- | -- | -- | W-3 Bylaw |
Zoning data extracted from municipal bylaw documents. Development rules may not reflect the most recent amendments. Always verify with Village of Belcarra before making decisions.